2020 Audi A3 2.0L L4 Gas Air Intake
- Increased horsepower
- Tuned and dyno-tested to improve acceleration and engine sound
- Low restriction aluminum tubing
- Easy to install using commonly available tools
- Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
- Washable and reusable oil-free filter media
| Estimated Horsepower Gain | 14 HP @ 4500 RPM |
| Replacement Filter | 21-2113DK |
| Air Filter Color | Red |
| Air Filter Material | Non-woven Synthetic |
| Air Filter Outlet Shape | Round |
| Clamps Included | 3 |
| Clamp Material | Stainless Steel |
| Clamp Style | Regular |
| Couplers Included | 1 |
| Product Style | AEM Cold Air Intake System |
| Intake Pipe Color / Finish | Gunmetal Gray |
| Intake Pipe Material | Aluminum |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. |
| TUV Approved (Europe) | No |
| Weight | 12.6 lb (5.7 kg) |
| Product Box Height | 12.25 in (311 mm) |
| Product Box Length | 20.25 in (514 mm) |
| Product Box Width | 12.25 in (311 mm) |
| California Restricted | Not legal for sale or use in California |
| Mounting Hardware Included | Yes |
| Warranty | Limited Lifetime |
Easy Moderate Advanced
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
90 Minutes
Installation PDF
Installation Instruction Sheet Dyno Chart - 2015 Audi A3 Quattro 2.0L - 14HP Increase
- Increased horsepower
- Heat shield with edge trim lining
- Low restriction aluminum tubing
- Air filter lasts up to 100,000 miles before cleaning is required (depending on driving conditions)
- Washable and reusable oil-free filter media
| Estimated Horsepower Gain | 12.5 HP @ 4659 RPM |
| Replacement Filter | 21-202DK |
| Air Filter Color | Red |
| Air Filter Material | Non-woven Synthetic |
| Air Filter Outlet Shape | Round |
| Clamps Included | 2 |
| Clamp Material | Stainless Steel |
| Clamp Style | Worm Gear |
| Couplers Included | 1 |
| Product Style | AEM Cold Air Intake System |
| Intake Pipe Color / Finish | Gunmetal Gray |
| Intake Pipe Material | Aluminum |
| Street Legal In All US States | Not legal for sale or use in California on any pollution controlled motor vehicle. |
| TUV Approved (Europe) | No |
| Weight | 7.8 lb (3.5 kg) |
| Product Box Height | 12.25 in (311 mm) |
| Product Box Length | 20.25 in (514 mm) |
| Product Box Width | 12.25 in (311 mm) |
| California Restricted | Not legal for sale or use in California |
| Mounting Hardware Included | Yes |
| Warranty | Limited Lifetime |
Easy Moderate Advanced
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
90 Minutes
Installation PDF
Installation Instruction Sheet Dyno Chart - 2017 Audi A3 2.0L - 12.5HP Increase
